GGuides
How to Restore Old Photos With AI, Step by Step
By the magick.bot editorial teamUpdated 8 min read
You don’t need Photoshop skills to fix old photos anymore. AI photo restoration removes scratches, dust, creases and fading in seconds. The part that still takes care is everything around it: scanning the print properly, and checking that the restored faces still look like your family.
This guide takes one photo from the shoebox to a finished file. We use the Restore tool in magick.bot, but the same steps work in any AI restorer.
What AI can and can’t fix
| Damage | What AI does well | Where it struggles |
|---|---|---|
| Scratches and dust | Removes fine scratches and specks reliably | Deep scratches running through eyes or mouths |
| Creases and folds | Smooths fold lines across backgrounds and clothing | Folds that cracked the surface and lost the image |
| Fading and color casts | Restores contrast and removes yellow or magenta tints | Areas faded almost to blank paper |
| Small tears | Fills thin gaps from the surrounding detail | Missing pieces of a face |
| Blur and soft focus | Sharpens edges, hair and faces | Tiny faces, where it may invent features |
Before you start: scan it properly
The scan is the single biggest factor in how good the result looks. A sharp, high-resolution scan gives the AI real detail to repair. A blurry phone snap forces it to guess.
- Clean the scanner glass with a microfiber cloth. Dust on the glass becomes damage in the scan.
- Pick the right resolution. Scan prints 4 × 6 in or larger at 600 dpi. Scan wallet photos, small prints and contact prints at 1200 dpi.
- Scan in color, even for black-and-white photos. Color mode captures more tonal information, and you can always convert later.
- Turn off the scanner’s own sharpening and dust removal. They can add halos that the AI then treats as detail.
- Leave stuck photos in the album. If a print is glued down or stuck to glass, scan it where it is rather than risk tearing it.
No scanner? Photograph the print flat, in soft daylight, with the phone held parallel to the photo. A scanning app such as Google PhotoScan helps remove glare.
Restore an old photo with AI: the steps
- 01Scan the print at 600 dpi, or 1200 dpi if it’s smaller than 4 × 6 in.
- 02Save the scan as a PNG, or as a maximum-quality JPG if the PNG is over 20 MB.
- 03Make a copy of the file and store the original somewhere safe.
- 04Crop away the scanner bed around the photo.
- 05Open studio.magick.bot and upload the copy.
- 06Choose Restore.
- 07Preview the restored photo next to the original at 100% zoom.
- 08Check every face: eyes, mouth, ears, hairline and marks.
- 09Run it again if a face looks like a different person.
- 10Colorize a copy of the restored black-and-white version if you want color.
- 11Upscale it if you plan to print larger than the original.
- 12Download it and save it next to the original scan with a clear file name.
Your scan is ready? Upload it to Restore and preview the result free.
Open the studioHow to check a restored face against the original
This is where most AI restorations go wrong, and checking takes about two minutes. When a face is small or damaged, the AI fills missing detail with features learned from other faces. Look for these changes:
- Eyes: shape, spacing and eyelids. AI tends to make eyes bigger, brighter and more symmetrical.
- Mouth: a closed mouth should stay closed, and no new teeth should appear.
- Ears, hairline and glasses: these are often redrawn from scratch.
- Marks: moles, scars, freckles and wrinkles are part of the person, and AI likes to smooth them away.
- Age and expression: does the person still look the same age, with the same expression?
The quickest test is to flip between the original and the restored version at the same zoom. Your eye spots a change much faster when the image switches in place than when the two sit side by side. Better still, show both to a relative who knew the person.
If a face has drifted, you have three options:
- Rescan the print at a higher resolution, so the AI has more real detail and guesses less.
- Run the restoration again; results can vary between runs.
- In any editor with layers, place the original face over the restored photo and blend the edges. You keep the repaired surroundings and the true face.
Should you colorize the photo?
Colorizing is an educated guess. The AI can’t know what color a dress, a car or someone’s eyes really were. It infers color from tones and common patterns, so skin, sky and foliage usually look plausible, while clothing, eye color and painted objects are guesses.
- Restore the photo in black and white first, then colorize a copy.
- Keep the black-and-white version, since it’s the more faithful record.
- Label colorized files as colorized so future relatives know the colors aren’t original.
- If you know a real color (“Grandma’s dress was blue”), correct it in an editor afterwards.
Save, print and share the result
- Keep three files: the original scan, the restored black-and-white version and any colorized copy.
- Name them clearly, for example
1952_rose-and-albert_wedding_restored.jpg, and note who is in the photo in a text file or the image’s description. - Back them up in two places, one of them off-site or in the cloud.
- Check the size before printing. Aim for about 300 pixels per inch at the print size: an 8 × 10 in print needs roughly 2400 × 3000 pixels. If the restored file is smaller, upscale it first.
Comparing tools before you commit? Read our research on the best AI tools to restore old family photos.
FAQ
- Can I restore old photos for free?
- Yes. magick.bot’s Free plan includes daily previews and standard-resolution downloads with no card required. Most other AI restorers also offer a small free allowance, with limits on resolution, watermarks or the number of photos.
- What resolution should I scan old photos at?
- Scan prints 4 × 6 in or larger at 600 dpi. Scan wallet-size photos, small prints and contact prints at 1200 dpi so the AI has enough detail to work with.
- Can AI fix a torn photo?
- AI can fill thin tears and small missing corners from the surrounding detail. If a tear removes part of a face, the AI has to invent it, so use a professional restorer or fix the face by hand.
- Will AI restoration damage my original photo?
- No. AI restoration works on a digital copy of your scan, so the physical print is never touched. Keep the original scan file too, so you can always start again.
- Can I restore old photos on my phone?
- Yes. Photograph the print flat in soft daylight, or use a scanning app like Google PhotoScan, then upload it to studio.magick.bot in your phone’s browser and choose Restore.
- How long does AI photo restoration take?
- Usually a few seconds to a minute per photo. Very damaged prints and large upscales take a little longer.
Try it on your own photo
The Free plan includes daily previews with no card required. Your original stays untouched.
Restore a photo